Curved Adhesive Baseplate for 360fly 4K
This is for use on curved surfaces. The 360fly 4K securely attaches to the stainless steel 1/4" x 20 stud with a tightening lock ring.
To apply your Curved Baseplate:
1. Clean the surface area that you will be applying the baseplate to - We recommend using isopropyl alcohol.
2. Allow the area to completely dry.
3. Remove adhesive backing from bottom of baseplate and place on desired spot.
4. Firmly press down on the baseplate with even pressure for at least 60 seconds.
Note: For best adhesion, we recommend applying your baseplate in an environment no colder than 60°F and no less than 24 hours before using.
IDEAL USES: Helmet
Lisäkysymyksiä? Lähetä pyyntö