Powering the 360fly 4K On/Off

Remove the camera from its Power Cradle and turn it on by holding the OnePush button down for 4 seconds.  The triangular OnePush button is surrounded by the LED indicator and is located on the side of the camera.

 

When powering on, the camera will vibrate three times and the LED will begin flashing blue. 

After completing the booting process, the LED will display a solid blue color, indicating that your camera is on and ready for use. 

You can also use the OnePush button to power off your camera by holding the button down for 4 seconds.  The camera will vibrate four times and the LED will flash blue to indicate that it is powering down. 

 


Tem mais dúvidas? Envie uma solicitação