Curved Adhesive Baseplate

This is for use on curved surfaces. The baseplate is designed to be positioned with the arrow facing forward.

 


To apply your Curved Baseplate:
1. Clean the surface area that you will be applying the baseplate to - We recommend using isopropyl alcohol.
2. Allow the area to completely dry.
3. Remove adhesive backing from bottom of baseplate and place on desired spot.
4. Firmly press down on the baseplate with even pressure for at least 60 seconds.

Note: For best adhesion, we recommend applying your baseplate in an environment no colder than 60°F and no less than 24 hours before using.

Attaching the Tilt Mount
1.  Align the Tilt Mount with the Adhesive Base.

 

2.  Turn clockwise to lock into place.



IDEAL USES: Helmet


Başka sorularınız var mı? Bir talep gönder